Experiment 6

Boyle's Law: Pressure-Volume Relationship in Gases.

 

The primary objective of this experiment is to determine the relationship between the pressure and volume of a confined gas. The gas we use will be air, and it will be confined in a syringe connected to a Pressure Sensor (see Figure 1). When the volume of the syringe is changed by moving the piston, a change occurs in the pressure exerted by the confined gas. This pressure change will be monitored using a Pressure Sensor. It is assumed that temperature will be constant throughout the experiment. Pressure and volume data pairs will be collected during this experiment and then analyzed. From the data and graph, you should be able to determine what kind of mathematical relationship exists between the pressure and volume of the confined gas. Historically, this relationship was first established by Robert Boyle in 1662 and has since been

 

Figure 1

MATERIALS

Power Macintosh or Windows PC                    Vernier Gas Pressure Sensor or Pressure Sensor

20-mL gas syringe                                            Vernier computer interface       

Logger Pro

 

PROCEDURE

1. Prepare the Pressure Sensor and an air sample for data collection.

a. Plug the Pressure Sensor into Channel 1 of the computer interface.

b. With the 20-mL syringe disconnected from the Pressure Sensor, move the piston of the syringe until the front edge of the inside black ring (indicated by the arrow in Figure 1) is positioned at the 10.0 mL mark.

c. Attach the 20-mL syringe to the valve of the Pressure.

·        Newer Vernier Gas Pressure Sensors have a white stem protruding from the end of the sensor box-attach the syringe directly to the white stem with a gentle half-turn.

·        Older Vernier Pressure Sensors have a 3-way valve at the end of a plastic tube leading from the sensor box. Before attaching the 20-mL syringe align the blue handle with the stem of the 3-way valve that­ will not have the syringe connected to it, as shown in the figure at the right-this will close this stem. Then attach the syringe directly to the remaining open stem of the 3 ­way valve.

Chemistry with Computers                                                                                                                                                     6-1


 

2. Prepare the computer for data collection.

3. Click  Collect   to begin data collection.

4. Collect the pressure vs. volume data. It is best for one person to take care of the gas syringe and for another to operate the computer.

a. Move the piston to position the front edge of the inside black ring (see Figure 3) at the 5.0-mL line on the syringe. Hold the piston firmly in this position until the pressure value stabilizes. ­

 

 

Figure 3

b. When the pressure reading has stabilized, click    Keep     Type "5.0" in the edit box. Press the ENTER key to keep this pair. Note: You can choose to redo a point by pressing the ESC key (after clicking   Keep   , but before entering a value).

c. Continue the procedure for volumes of 7.5, 10.0, 12.5, 15.0,17.5, and 20.0 mL.

d. Click   Stop   when you have finished collecting data.

5. In your data table, record the pressure and volume data pairs displayed in the Table window (or, if directed by your instructor, print a copy of the Table window).     ­

 

6. Examine the graph of pressure vs. volume. Based on this graph, decide what kind of mathematical relationship you think exists between these two variables, direct or inverse. To see if you made the right choice:

a. Click the Curve Fit button.

b. Choose Variable Power (y = Ax/\n) from the list at the lower left. Enter the value of n in the Degree/Exponent edit box that represents the relationship shown in the graph (e.g., type "1" if direct, "-1" if inverse). Click   Try Fit   .

c. A best-fit curve will be displayed on the graph. If you made the correct choice, the curve should match up well with the points. If the curve does not match up well, try a different exponent and click  Try Fit  again. When the curve has a good fit with the data points, then click    OK 

 

7. Once you have confirmed that the graph represents either a direct or inverse relationship, print a copy of the -Graph window, with the graph of pressure vs. volume and its best-fit curve displayed. Enter your name(s) and the number of copies you want to print.


 

DATA AND CALCULATIONS

 

Volume (mL)

Pressure (kPa)

Constant, k (P/V or PV)

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

 

 

 

 

 

.

 

PROCESSING THE DATA

1. If the volume is doubled from 5.0 mL to 10.0 mL, what does your data show happens to the pressure? Show the pressure values in your answer.

 

2. If the volume is halved from 20.0 mL to 10.0 mL, what does your data show happens to the pressure? Show the pressure values in your answer.

 

3. If the volume is tripled from 5.0 mL to 15.0 mL, what does your data show happened to the pressure? Show the pressure values in your answer.

4. From your answers to the first three questions and the shape of the curve in the plot of pressure versus volume, do you think the relationship between the pressure and volume of a confined gas is direct or inverse? Explain your answer.

 

5. Based on your data, what would you expect the pressure to be if the volume of the syringe was increased to 40.0 mL? Explain or show work to support your answer.

6. Based on your data, what would you expect the pressure to be if the volume of the syringe was decreased to 2.5 mL? Explain or show work to support your answer.

7. What experimental factors are assumed to be constant in this experiment?

8. One way to determine if a relationship is inverse or direct is to find a proportionality constant, k, from the data. If this relationship is direct, k = P/V. If it is inverse, k = PV. Based on your answer to Question 4, choose one of these formulas and calculate k for the seven ordered pairs in your data table (divide or multiply the P and V values). Show the answers in the third column of the Data and Calculations table.

 

9. How constant were the values for k you obtained in Question 8? Good data may show some minor variation, but the values for k should be relatively constant.

10. Using P, V, and k, write an equation representing Boyle's law. Write a verbal statement that correctly expresses Boyle's law.

Chemistry with Computers                                                                                                                6-3